How do I use the fire blanket?

In case of a fire, firstly, turn off the gas or electricity supply. Remove the fire blanket from its container, hold it by the fabric straps and to prevent burns on the hands and arms. Make sure you wrap the top edges of the blanket around your hands to protect them.

Roll up your sleeves so they do not catch fire.

Carefully cover the flames with the fire blanket, making sure that you cover the whole area so that you can effectively cut off the airflow and extinguish the flames. If the fire is larger than the blanket, do not attempt to put it out. Get out of the building and call the fire brigade immediately.

DO NOT touch the fire blanket or anything underneath it until at least an hour has passed since the fire has been extinguished.

Can a fire blanket burn?
This blanket will minimize the heat and potential for burn and injury by wrapping your body in it while escaping. … The wool blankets are flame proof with a specially treated chemical that prevent it from catching on fire. It should never be used to enter a fire, only to exit and smother a fire.

What is fire blanket used for?
The purpose of this document is to provide information relating to domestic fire blankets as a fire safety measure. A fire blanket consists of a piece of fire-resistant fabric (usually woven glass fibre) that can be used to smother a small fire or wrap around a person whose clothing is alight.

How does the fire blanket works?
A fire blanket is a highly flame-resistant blanket that can be used to extinguish a small fire or to wrap around a person in case of a fire. Fire blankets are made from 2 layers of woven glass fibre fabric and an inner layer of fire retardant film. They work by cutting off the oxygen supply to the fire.

Is standard for fire blanket?
Fire blanket standards and testing. The current standard for fire blankets is BS EN 1869:1997 and this covers a variety of sizes, usually square, from 1.0m x 1.0m to a maximum of 1.8m x 1.8m, although some rectangular blankets are accepted too.

What is the proper procedure to use a fire blanket?
Method 1 Putting Out a Fire
Remove the fire blanket by pulling down sharply on the tabs hanging from the bottom of the package. …
Protect your hands. …
Place the blanket over the fire. …
Turn off any heat source, such as a stove burner. …
Leave the blanket in place for at least 15 minutes. …
Call the fire department.

Can you wash a fire blanket?
Wash each blanket separately using cool water and mild detergent. Agitate gently for two minutes at high water level. Do not use a bleaching agent.

How long do you leave a fire blanket on for?
Leave the blanket on the heat source until you are sure that the flame has been suffocated and the heat dissipated. You should leave the blanket in place for at least 15–30 minutes to ensure the fire is completely gone. ⇒ Leave the building and call the fire brigade.

How long do fire blankets last?
seven years
It also recommends that consideration should be given to the replacement of fire blankets after seven years from the date of commissioning (or as otherwise specified by the fire blanket’s manufacturer).

Do fire blankets expire?
Fire Blankets. NO EXPIRATION DATE – The Fire Blanket never requires costly maintenance or recharging. … MESS FREE – Unlike fire extinguishers, Halon systems, or water; there is no mess to clean up after using a Fire Blanket.

Can you wash a fire blanket?
Wash each blanket separately using cool water and mild detergent. Agitate gently for two minutes at high water level. Do not use a bleaching agent.